Just a quick run through –
- S13 steering hub
- Steering wheel
- Steering wheel screw (set of 6)
General removal steps:
- Disconnect the battery
- Beep horn, turn on lights… drain any stored energy
- CENTER STEERING WHEEL
- Remove the steering colum cover (usually screws underneath)
- Unplug any connectors under the steering column
- On each side of the steering wheel has a cover, pop it open with a screwdriver
- Security Torx bolt on each side (T50, security bit has the hole in the middle)
- Take off cover that’s under the steering wheel, that should also be unplugged
- Airbag should come out (be careful)
- Unplug horn/cruise control connectors
- There is the 19mm nut in the middle of the steering wheel.
- Wheel is stuck on there. Shake left and right, up and down to remove
Steering wheel
- Hub needs to be centered as much as possible
- Put steering hub in place
- Put back 19mm nut and torque to spec
- Plug horn button connection
- Steering wheel in place
- Tighten 6 steering wheel screws