Progress Report

2020 - Jan and Feb parts collecting.

I made a mistake when I was in LA. It was more of a social event and so I didn't really break down what was there and what I needed to get. For the first 3 weeks of January 2020,
Marco and I would converse about what to do.

1st - the block needed to get to the machine shop and checked.
2nd - get the big components that were obviously missing. At this point, the Greddy intake and Transmission were taken cared of,
I still needed to get an exhaust manifold and decided which turbo I wanted to use. Marco suggested Tomei MX8265.

Exhaust manifold and heat shield


Marco then gave me a list to get of items:

Marco gave me the first parts list to rebuild.

• CP forged pistons kit (rings and wrist pins)
• OEM Nissan timing belt and idler tensioners
• N1 Water pump
• ARP head studs
• Tomei metal head gasket
• N1 oil pump
• Greddy timing belt
• Nismo thermostat
• Oil pan with bung
• Oil head drain kit with hose (Franklin Engineering)
• RB25det Rear main seal (Nissan parts CC)
• Nubis Exhaust manifold studs (raw brokerage)
• Nubis Rear main seal bolt kit (raw brokerage)
• Nubis oil pan bolt kit (raw brokerage)
• Nitto Crank Collar (on crank)
• RB25det transmission (at shop)
• Greddy Intake manifold (at shop)
• RB25det Throttle body (at shop)
• Upper radiator hose insert
• RB25det TPS
• Billet alloy Cam covers seals (Franklin engineering)
• RB25det exhaust manifold with heat shield
• Greddy Oil catch can
• Bee R rev limiter
• Pivot shift lamp
• Pivot KM reader
• Pivot FLAT turbo timer
• Nismo clutch, flywheel and pressure plate
• Japanese ETC